Menu (menu button)
Manual BASIC Reference
manual, and Notice.
Setting Setting mode.
SoftKey Select keyboard mode.
KeyAssign Setup of assignment of a key.
Multi-Tab It can edit in selecting from max five editor.
(In Android2.x, it's ok too, tap the above title bar)
SQL Mode Basic-SQL mode change.
Undo To return to the state of one step before in edit.
Input-line,Delete-line,new,load,renum,delete,replace. It work after this instruction.
BT_Signal In Bluetooth communication,
self-terminal discovery signal is taken out as a Server.
Variable-table The list of Variables & Value in the time is displayed in the dialog.
(except for array) (Value is always changed during execution)
It can select and can input a value.(Local variable is Impossible)
Local variable is attached 'L' mark at right side.
Direct Mode / Text Box
To switch input editor type whether Direct-Console or TextBox.
It is possible Line-input and Direct-command.
Only source with line-number is treated.
If load the source without line-number, line-number is assigned automatically.
By save"",n ('n' switch), it is possible no line-number save. (Mutual conversion possible)
Line-number, No-line-number, Mixture, it's possible to treat all type sources.
It can also 'goto' 'gosub' jump by using label.
After execution, to return to editor by menu or back key.
'Search','Replace' is added to the menu. (case search-next: please press side volume+ key)
If current source is Line-number type or Mixture, it can't be switched to 'Direct Mode'.
After moving a cursor to the text head, and input 'new[enter]', and run.
One touch execution.
Run ,c Intermediate code compile execution.
Run ,i Interpreter execution.
Edit. An edit part is chosen from function and label.
Load Load program. It can select from extension'.bas','.sql' in current folder.
Save Save program. If extension is omitted, '.bas' is attached.
Stop The program under execution is stopped.(When key hidden)
To be also able to stop by 'Back-key' of during execution.
Select the font size.(12,16,24)
The language setting of the manual.
The sequence x,y and the starting point of text coordinate is specified.(x,y|0,0/y,x|1,1)
Softkey 'Repeat ON/OFF','Flick input',and 'Auxiliary input' be chosen.
The repeat function may not work properly depending on the model.
File operation lock:
The File operation command(copy,kill,name,mkdir) can be prohibit entirely.(ON-prohibit/OFF)
Device access lock:
The access of Device(Camera,GPS,Mic,Load"http:") can be prohibit entirely.(ON-prohibit/OFF)
Key Click SE:
The existence of sound(Soft-key typing sound,Error-beep) is set up.
And to put "keytype.wav" in the current folder, it's possible to use the key type tone of self made.
Since there is file "keytype0.wav" as sample, to be able to try this by erasing 0.
Select Format-control-string type in 'Print Using' command.
[DollarStyle] or [YenStyle].
Key skin color:
The color of software keyboard is chosen.
If the picture of "keyskin.png" is put into current folder and 'WP' is chosen,
the picture can be used as a key skin.
Moreover, "keyskinh.png" can also be separately used for horizontal screens.
The position of Current folder can be changed to either 'Internal storage' or 'SD card'.
When SD card is selected, and there is no SD card, it is automatically set to 'Internal'.
OFF Graphics are drawn speedy without anti-aliasing.
Not used other than the specified color code.
ON Graphics are drawn by 'Jaggies mitigation' and 'Smooth outline' against background color.
To set which [old-machine-color-compatible] to adapt to.
The default'AB' is the mathematical arrangement based on binary number.
To select about Title & Status bar at the top of screen, whether to display or hide.
(At 'Hidden', not be displayed debug-line of 'tron')
Back-key became substitute for Menu-key in Status bar hidden mode.(Android3.0 or more)
It's necessary to restart App to make this setting effective.
1.For the Hardware keyboard (Full screen edit
2.Software keyboard of System (Full edit area covered by softkey)
-(which doesn't appear depending on a model.)
3.Exclusive use AB Software keyboard (Exclusive use edit area)
4.Virtual device. (Pad & Button)
Application is ended by Back-button+Dialog[OK].
Home-button, it will be in the evacuation state.
At the time of App-End or Go External-Application,
The current Tab's program is saved in the file"ab_backup.bas"(CurrentFolder), automatically.
When it is AB-softkey, the range of edit area is switched to its own exclusive use size.
The exclusive use edit size is held also at the run-time.
It can change in 'console' statement.
If interrupted by 'Stop' key in run, key-state that has been selected at 'run'start will be restored.
The selective key-state is stored at app end, and the last key-state will be restored at startup.
The Flick input chooses a key by Flick, and the character is inputted when it release.
Press and hold for 0.3 seconds, the character displayed on the key upper part
(Alt combination character) will be inputted automatically.
In Auxiliary-input mode, the commands according to characters which
be inputted at the head will be displayed on the right side by listing.
(The next commands can display further by '\/'.)
The chosen from them is inputted into the editor.
And, the Pop-up help for every command can be displayed by touching right side of the frame.
The Software keyboard of the external application,
there are correspondence and non-correspondence.
*As for System's software keyboard, behavior is various in each model.
Please use AB-exclusive software keyboard basically.
[New Editor] Insert input
This editor, the commands are displayed by
The function 'Flick/Auxiliary input' is inherited.
It is input mode based on string insertion, [ins] is locked.(PC editor like)
Lock isn't released even if pushed [ins/bs] key. Release is [alt]+[ins/bs].
Flick scrolling by left edge touch is abolished.
If push [ins/bs] at left edge cursor, a blank line is inserted.
And middle line number is displayed automatically.
If the line of middle number(One digit is fraction:not 0) is inputted,
(e.g. Between 320 and 330, '325 print' etc.)
'renum 100,,10' is executed automatically, and editor display is updated.
To be able to move the cursor for the cross direction at the upper half screen touch.
Models with hardware keyboard, External bluetooth
their placement of symbol is different messy.
First must be set key by 'KeyAssign'.
Characters is displayed on a panel.
Please touch a character to set up.
And please press the key to assign.
The input setting that it used together with the
lock of the 'Shift or Alt' key is possible.
The 'Stop-key' is assigned to the 'search key' from the beginning.
Default It returns to the initial state at the time of shipment.
It's used for reset when set wrong assign.
Save The state of a key is saved. It is loaded at a start-up.
Close KeyAssign mode is ended.
Setting by AB-exclusive soft key also became possible.
In the case of the AB-key, Alt will be locked beforehand,
key setup of Alt combined use can be performed.
Moreover, the assignment to the key of control relationship(Alt,Enter,etc) isn't possible.
The assigned data is saved independently with
The text editor phase(Above soft-key) is
divided into some area which can be operated by touch.
Right side region:
Furthermore, it is perpendicularly divided into four.
Top: List-Page up.
Center-Upper: List-Roll up.
Center-Lower: List-Roll down.
Bottom: List-Page down.
If touched Page up/down in normal mode, to enter the Editing mode automatically.
-When using Hard-key in edit mode, it can page up-down by 'Shift+Cursor up-down'.
Left side region:
It is possible to make scrolling the List by up&down flick.
(It only work at the 'Repeat ON/OFF' input mode)
Center plane: By the difference in the input mode, there are two operation modes.
-Type A: in 'Repeat ON/OFF'input mode.
A cursor moves to the position touched directly.
Moreover, if four directions around a cursor are touched, it will move in the direction.
By flick to left/right direction, a cursor can be moved to left/right edge.
-Type B: in 'Flick/Auxiliary/InsertEditor' input mode.
The screen, by the style divided in the cross direction.
It's assigned to cursor movement(top,bottom,left,right) respectively.
To keep pressing, repetition cursor movement ok.
'Fn-key'-input and control operation.
- Function key input.
Pressing the 'Fn key', and next pressing (A-Z,0-9)key, the defined string is inputted.
Function key commands. [Definition:'key' Confirm:'key list']
- Copy (Fn-Fn)
Cursor is united with the head of the string to copy, and press 'Fn key'.
And cursor is moved to the tail end of the string and 'Fn key' is pressed again,
the string will be copied.
It can copy from two or more characters.
- Paste (Fn+space)
Cursor is moved to attachment(insertion) place, and press 'Fn key',
and next 'space key' is pressed, the string of clipboard will be pasted.
It also support to 'copy & paste' of the program including line feed code.
After paste, it is stored as program by pushing 'enter'key in each line.
- Delete the back of line (Fn+stop/cls)
It can delete (cursor-end of line) string.
Move the cursor to the specified position, and
in the state that 'Fn key' was pressed, then press 'stop(cls)'key.
- Split line (Fn+enter)
Move the cursor to the split position, and
in the state that 'Fn key' was pressed, then press 'enter'key.
The original line is decided by it.
New line is decided as a new line by inserting line number and pressing the Enter key.
- Insert line (Fn+bs/ins)
In the state that 'Fn key' was pressed, then press 'bs(ins)' key.
To insert a blank line.
- Line position Pinning (Fn-Fn)
It is same key operation as 'copy', but
by pressing Fn-key twice without moving the cursor,
the line is memorized as 'Line position Pinning'.
If moving to another area, by select [Menu>Edit>Pin(Label list)],
it can return to 'Pinning line position'.
The 'Fn key' in the hardware keyboard is assigned to the 'Right shift key'.
Depending on the model, there are thing that 'Fn' is stamped to 'Alt key'.
(Really, it is 'Alt key')
If models don't have 'Right shift key', please assign to any key by 'KeyAssign'.
Exchanging data with PC using SD card.
There are several ways in addition to replacing the
Connect Android and PC with a USB cord,
chose the item of SDcard(storage) from setup of Android,
and tap [Turn on USB storage.]
After a while, it is connected and Explorer comes out in PC side,
then exchange files by it.
If operation is over, turn it off and cut connection.
*In Android4.4 later and not rooted models, External SD card access is prohibited directly.
In this case, to be recommended to exchange data of current folder by rooted or using 'Google drive' etc.
Memo-text for editing assistance.
The text-box for memo can be opened by left Flick
This can be used memo writing of the free contents.
'Back button' is pressed to return to programming editor.
The contents is automatically saved in current folder "ab_memo.txt" at the end of app.
If put the text to want to reference into "ab_memo.txt" in advance,
it is loaded in the app starts, and
it'll be possible to refer to immediately.
How to copy & paste in the Memo-text.
Move to 'Copy start position' and push 'Volume button[-]' once, and
move to 'Copy end position' and push 'Volume button[-]' again,
the character strings of the range are copied.
Move the cursor to 'Paste position' and push 'Volume button[+]',
the character strings are pasted.
This 'Memo-text' copy-strings can exchange to 'Main editor' Fn-copy-strings
with each other by paste.
Country particular character input
In the case of direct mode, press space key after
alt key in editor.
UI text box will appear, tap it and enter the particular characters in system's keyboard.
It will be inputted into an editor if OK is finally pushed.
This input mode of operation can be performed as well by pressing the key you assigned a key 'Uni'.
Hardware controllers are usable in addition to
Virtual-device on the screen.
Bluetooth controller (beforehand, it is necessary to carry out pairing.
by Machine-Setting>Bluetooth ON>Scan )
And also NVIDIA-Shield, Xperia-Play controller are usable.
Acquire: 8way(STICK-function), 2buttons(STRIG-function)
Button's 'assign code & carved seal' of each controller may be different.
*Caution:There is also something to which a key code of 'stop' is assigned in the button.
Assign by Hardware-keyboard: [arrow-key:direction X:A-button Y:B-button]
Please refer to general information for pairing method of Bluetooth devices and Android.
If Basic is made to uninstall,
the contents of current folder of main part "data/data/and.bas/files/" will be cleared.
(SD side is not cleared)
In this Basic, many Bitmap screens are used by superposition.
In the model more than 2048 pixel resolution,
because to avoid memory over,
the actual screen is limited to 2048 pixel or less.